Search Results for: general aviation inc

However, the FAAs ADS-B installation date of January 1st, 2020 was nearly a decade away, and he faced a hostile audience. Numerous pilots seated around us hit him on point after point. The price of the transponder units. The installation and certification headache. The lack of ADS-B coverage (at the time). The overall cost-vs.-benefit scenario. They clung to the if it aint broke, dont fix it theme. The company rep did his best, but it was a frustrating battle.

The event perhaps most demonstrative of what can happen as an aircraft ages occurred on April 28, 1988, over Hawaii. Thats when an Aloha Airlines Boeing 737-200 operating in scheduled passenger service as Flight 243 between Hilo and Honolulu lost part of its cabin roof while in cruise at FL240. The crew successfully landed the airplane after diverting to Maui. Of the 89 passengers and six crewmembers aboard, there was one fatality-a flight attendant who was swept overboard during the decompression event.

The airline industry long ago figured out that one of the most dangerous things in aviation is two pilots trying to fly the same airplane at the same time. One inevitable result of such an arrangement is that there are times when no one is flying, and one of the ways we know this is from the accident record. Airlines evolved the pilot-flying/pilot-not-flying concept to acknowledge this characteristic of crewed cockpits and established clear responsibilities for each pilot.

With the National Institute for Aviation Research (NIAR) and its location in Wichita—known as the Air Capital—Wichita State University has built a legacy as a leading campus for aerospace-related studies. Now, the university plans more growth with the development of its Innovation Campus to act as an incubator for engineering research and career preparation. Industry […]

Hurricane Dorian gained strength on Friday and continued its trajectory towards Florida, as pilots, aircraft owners, and rescue organizations made preparations for the storm. The storm stalled over the Bahamas, causing epic destruction in its wake. The FAA sent out an alert on Thursday to general aviation pilots, urging them to monitor the weather using […]

Once again, the Experimental Aircraft Association in July pulled off another great AirVenture fly-in at its home in Oshkosh, Wis. This years event had a little of everything, including torrential rain the Friday evening before Mondays opening day, nighttime air shows and lots of airplanes of every shape, size and purpose. Perhaps because the pre-show rain knocked everyone off-kilter-followed by mid-week heat-the overall event seemed to need more cowbell, but it definitely was worthwhile checking out all the new stuff and checking in with long-time friends.

In the May 2019 issue, I couldnt help but note the connection between Key Dismukes article Stress in the Cockpit and Mr. Burnsides observations in Cockpit Communication. When there is poor communication in the cockpit, stress levels are going to rise. It doesn’t matter if the communication shortfall takes place in the air or on the ground. Two of the four categories of errors made by airline crews that were pointed out by Dr. Dismukes were inadequate comprehension, interpretation, or assessment of a situation, and inadequate communication. These categories are faithful descriptions of the failure to explicitly define and communicate expectations that your friend experienced with his flight instructor.

Most of my articles for this journal focus on managing the risk of flying piston-powered general aviation aircraft, with examples of good and poor risk management. But risk management is at least equally critical in the world of operating airliners and turbine-powered transport category aircraft. Recent air carrier accidents provide illustration and lessons relevant to operating small general aviation aircraft, especially when designing and certifying them. In fact, and just as during flight operations, the job of managing risk in the design and certification is to identify, assess and mitigate that risk. These procedures apply even more objectively when using rigid design criteria, especially when they involve transport category aircraft.

We all know how to fly a missed approach. We probably did a handful of them on our instrument checkrides, and when were out practicing approaches, even in a sim, we most often go missed. We may not be flying a full missed approach procedure as published, but we still have to reconfigure the airplane and climb away. When were practicing, we know how the approach will terminate: by going around at the missed approach point. Its what we expect when practicing.

The FAA defines a hot spot as a location on an airport movement area that demands heightened attention by pilots and vehicle operators due to the history of potential collision or runway incursion. Knowing where any hot spots are at the airports you intend to use arms you with useful risk management information. Meanwhile, the FAA has gone sort of nuts with the airport hot spot concept. Dont believe me? Check out the airport diagram for Addison Airport (KADS) in Dallas, Texas, below. Every taxiway intersection east of the runway is a hot spot.