At 1150 Eastern time, the Skyhawk was substantially damaged when the nose gear collapsed during a landing attempt. Visual conditions prevailed for the solo instructional flight; the student pilot was not injured. The pilot later reported crossing the runway threshold approximately 100 feet above ground level and then reducing engine power to idle. During the landing flare, the airplane touched down with a mild impact, followed by a bounce. The pilot continued to flare, with no additional engine power, and the second touchdown was harder than the first. No additional corrective action was attempted for the third touchdown, which broke the nosewheel. The prop hit the pavement and the plane came to stop.
June 26, 2004, Fishers, Ind. / Cessna 172
At 1150 Eastern time, the Skyhawk was substantially damaged when the nose gear collapsed during a landing attempt. Visual conditions prevailed for the solo instructional flight; the student pilot was not injured. The pilot later reported crossing the runway threshold approximately 100 feet above ground level and then reducing engine power to idle. During the landing flare, the airplane touched down with a mild impact, followed by a bounce. The pilot continued to flare, with no additional engine power, and the second touchdown was harder than the first. No additional corrective action was attempted for the third touchdown, which broke the nosewheel. The prop hit the pavement and the plane...
Key Takeaways:
- A Skyhawk sustained substantial damage when its nose gear collapsed during a student pilot's landing attempt.
- The incident involved the pilot crossing the runway threshold too high and experiencing multiple progressively harder touchdowns after an initial bounce.
- No additional engine power was applied after the first bounce, leading to the nosewheel breaking on the third touchdown and the propeller striking the pavement.
- The solo instructional flight occurred under visual conditions, and the student pilot was not injured.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
