At approximately 18:47 CDT, the pilot of a Piper Apache intentionally ground-looped the airplane after the brakes reportedly failed to operate during the landing ground roll. The two pilots aboard were uninjured. The pilot-rated passenger said the aircraft landed on the 2,600-foot sod runway at approximately 75 mph but there appeared to be no brakes. As the aircraft neared the east end of the runway, the aircraft was ground-looped to keep from crossing Kerr Road and going into the trees. The aircraft exited the runway to the left, crossed a ditch and came to a stop in the eastbound lane of Highway 321. An inspector examined the brakes and found no anomalies, then performed an operational check and the brakes functioned properly.
June 25, Cabot, Ark. / Piper PA-23-250 Apache
At approximately 18:47 CDT, the pilot of a Piper Apache intentionally ground-looped the airplane after the brakes reportedly failed to operate during the landing ground roll. The two pilots aboard were uninjured. The pilot-rated passenger said the aircraft landed on the 2,600-foot sod runway at approximately 75 mph but there appeared to be no brakes. As the aircraft neared the east end of the runway, the aircraft was ground-looped to keep from crossing Kerr Road and going into the trees. The aircraft exited the runway to the left, crossed a ditch and came to a stop in the eastbound lane of Highway 321. An inspector examined the brakes and found no anomalies, then performed an operational...
Key Takeaways:
- A Piper Apache was intentionally ground-looped during landing by the pilot due to reported brake failure, preventing it from crossing a road and entering trees.
- Both pilots aboard were uninjured, but the aircraft exited the runway, crossed a ditch, and stopped in the lane of a highway.
- A subsequent inspection and operational check of the brakes found no anomalies and confirmed they functioned properly.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
