At 11:00 EST, a Cessna 182P taxied into an unoccupied parked airplane at the Hartford-Brainard Airport. The two occupants were not injured. The pilot said he taxied the airplane from the north side of a building to the south side. He then set the parking brake and secured the engine to load a passenger along with some baggage. With the passenger and baggage loaded, the pilot started the engine. While the passenger was occupied looking for a pair of sunglasses, the pilot looked down to set the transponder code. With the engine at low rpm, the airplane rolled approximately 60 feet and collided with a Cessna 210. The 182s propeller slashed open the fuel tank of the 210 and showered the 182 with fuel. The pilot secured the electrical master switch and there was no fire. An inspector found no anomalies with the parking brake.
Feb. 9, Hartford, Conn. / Cessna 182
At 11:00 EST, a Cessna 182P taxied into an unoccupied parked airplane at the Hartford-Brainard Airport. The two occupants were not injured. The pilot said he taxied the airplane from the north side of a building to the south side. He then set the parking brake and secured the engine to load a passenger along with some baggage. With the passenger and baggage loaded, the pilot started the engine. While the passenger was occupied looking for a pair of sunglasses, the pilot looked down to set the transponder code. With the engine at low rpm, the airplane rolled approximately 60 feet and collided with a Cessna 210. The 182s propeller slashed open the fuel tank of the 210 and showered the 182 w...
Key Takeaways:
- A Cessna 182P rolled approximately 60 feet and collided with a parked Cessna 210 at Hartford-Brainard Airport.
- The incident occurred after loading a passenger and baggage, while the pilot was looking down to set the transponder code.
- The collision resulted in a slashed fuel tank on the 210, but no injuries or fire, and an inspection found no anomalies with the 182's parking brake.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
