At 13:30 central time, a Cessna 172S lost most of one propeller blade during takeoff from St. Cloud Regional Airport. The separation occurred at 400 to 500 feet above the runway and the CFI was able to land the airplane on a parallel taxiway without incident. The airplane was damaged by vibration as a result of the propeller separation. Inspection of the airplane revealed the McCauley propeller blade separated at a point approximately 8 inches from the hub. The airplane had a total time of 236 hours.
Dec. 12, St. Cloud, Minn. / Cessna Skyhawk
At 13:30 central time, a Cessna 172S lost most of one propeller blade during takeoff from St. Cloud Regional Airport. The separation occurred at 400 to 500 feet above the runway and the CFI was able to land the airplane on a parallel taxiway without incident. The airplane was damaged by vibration as a result of the propeller separation. Inspection of the airplane revealed the McCauley propeller blade separated at a point approximately 8 inches from the hub. The airplane had a total time of 236 hours....
Key Takeaways:
- A Cessna 172S experienced a propeller blade separation during takeoff at St. Cloud Regional Airport, occurring 400-500 feet above the runway.
- The instructor pilot successfully landed the aircraft on a parallel taxiway, despite the plane sustaining damage from vibration caused by the incident.
- Inspection revealed the McCauley propeller blade separated 8 inches from the hub on the aircraft, which had only 236 total hours.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
