At 10:34 PST, a homebuilt Pitts S1X crashed while performing an aerobatic routine at an airshow at Cable Airport. The pilot was killed. Witnesses said the pilot dove into the aerobatic box, performed three snap rolls to the right and recovered. The second time he entered the box, the pilot performed three snap rolls to the left, and, as he rotated about of the way around on the third to fourth snap roll, he seemed to experience what witnesses called some sort of problem. The pilot arrested the snap roll and transitioned into an upright flat spin. At that point, the pilot pulled the power back to idle. In the second turn of the spin, the airplane was about 200 to 300 feet agl. The witnesses said the pilot did not have sufficient altitude to recover.
Jan. 8, Upland, Calif. / Pitts S1X
At 10:34 PST, a homebuilt Pitts S1X crashed while performing an aerobatic routine at an airshow at Cable Airport. The pilot was killed. Witnesses said the pilot dove into the aerobatic box, performed three snap rolls to the right and recovered. The second time he entered the box, the pilot performed three snap rolls to the left, and, as he rotated about of the way around on the third to fourth snap roll, he seemed to experience what witnesses called some sort of problem. The pilot arrested the snap roll and transitioned into an upright flat spin. At that point, the pilot pulled the power back to idle. In the second turn of the spin, the airplane was about 200 to 300 feet agl. The witness...
Key Takeaways:
- A homebuilt Pitts S1X crashed during an aerobatic routine at an airshow, resulting in the pilot's death.
- Witnesses reported the pilot encountered a problem during a series of left-hand snap rolls, after which the aircraft transitioned into an upright flat spin.
- Despite the pilot reducing power to idle, the aircraft was at an insufficient altitude (200-300 feet AGL) during the spin for recovery.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
