It wasn’t long after the accident before harsh words began flying over the viability of ‘see and avoid’ in such crowded airspace. With scores of tour helicopters mixing with fixed wing traffic, there was no shortage of criticism launched at the FAA for allowing such “chaos” to persist. Calling the corridor “an accident waiting to happen” and comparing it to “the Wild West” critics clamored for additional controls-even closing the corridor altogether. New York Mayor Michael Bloomberg, a licensed helicopter and fixed-wing pilot himself, preached a measured approach to the issue. He cited the tremendous financial benefit the tours bring to the city, and he also pointed out that this was the first collision, ever, within the compact airspace. Ironically, one suggestion that emerged was to have helicopters fly at lower altitudes, 600 to 800 feet, while fixed-wing aircraft would be asked to remain higher while still staying below the 1,100-foot ceiling. Asked about the idea, John Del Giorno, the on-air helicopter reporter for ABC affiliate Channel 7 in New York, recalled that up until a few years ago, that had been the arrangement for operating within the corridor. But tour operators had shifted to flying higher in response to noise complaints.
Uproar Ensues Over Safety of the Hudson River VFR Corridor
Key Takeaways:
- Following an accident in crowded airspace, critics severely questioned the FAA's "see and avoid" policy and called for stricter controls or even closing the corridor, describing it as "chaos" and "the Wild West."
- New York Mayor Michael Bloomberg, while acknowledging the incident, advocated for a measured approach, citing the tours' significant financial benefits and noting it was the first collision ever in that compact airspace.
- Ironically, a proposed solution to have helicopters fly lower (600-800 feet) and fixed-wing aircraft higher was the original arrangement, which tour operators had changed due to noise complaints.
Key takeaways sponsored by Aviator Pro | Start Your Training ->
See a mistake? Contact us.
