Flight Design Ramps Up Production of F2, CT Series Aircraft

Factory in the Czech Republic is sending two new production models to Airtime Aviation in Oklahoma.

Meg Godlewski

Wednesday, September 13, 2023 at 08:05 PM ET

Verified

Flight Design has increased production again after conflict-induced drag. [Courtesy: Flight Design]

Key Takeaways:

Flight Design general aviation is significantly increasing production of its F2 series aircraft at its new Sumperk factory in the Czech Republic, supported by a strong order list and the Lindig Group, with the first F2-LSA models now shipping to the U.S.
The company anticipates substantial business growth, particularly for its F2 series, due to the FAA's MOSAIC project, which is expected to allow for increased payload and market appeal, especially for flight schools.
Despite past challenges, including operations in Ukraine, Flight Design is also progressing with the development of the four-seat F4 aircraft, which shares systems with the F2 and is moving towards the prototype stage.

See a mistake? Contact us.

Flight Design general aviation, the European manufacturer of the F2 and CT series of aircraft, is increasing production at its new Sumperk factory in the Czech Republic. The LSA manufacturer noted that the first two production F2-LSA models are now heading to U.S. importer Airtime Aviation in Tulsa, Oklahoma.

According to Flight Design, the order list currently stands at more than 100 aircraft, and production is increasing to support four F2 aircraft per month by the end of 2023. The company said this was made possible in part by support from the Lindig Group, a majority shareholder.