fbpx

Hartzell Certifies Swept Propeller for TBM

New prop boosts performance of turboprops.

The FAA and EASA have signed off on the type certification for a five-bladed Hartzell propeller specifically designed to improve the performance of Daher-Socata’s TBM 700 and 850 single-engine turboprops. The composite propeller has a thin, swept airfoil that Hartzell claims improves takeoff acceleration, climb rates and cruise speeds, while producing less noise than the previous props installed on the airplanes.

The company claims that the takeoff acceleration from zero to 90 knots is improved by 10 percent compared with any other available propeller, climb rates are 100 feet-per-minute greater and cruise speeds two knots faster than the four-blade prop and five knots faster than the five-blade wood props previously available for the airplane.

One of Hartzell’s corporate pilots, Mike McCorkle, said the climb performance of the company’s TBM 700 now closely matches the 850’s. “Coming out of Coeur d’Alene, we went straight up to 27,000 feet in only 16 and a half minutes with [a] temperature eight degrees above standard,” McCorkle said. “That’s an average of nearly 1,500 feet-per-minute, and we shaved at least a couple of minutes off of our normal time to climb.”

The new propeller will be available as a supplemental type certificate retrofit for the TBMs. STC approval is expected in the first quarter of next year. The cost for the propeller through Hartzell’s Top Prop Conversion program is $65,000, less $9,000 trade in. Installation and rigging is expected to take three to four hours. The STC’d propeller will also be available through Daher-Socata’s distributor network.

We welcome your comments on flyingmag.com. In order to maintain a respectful environment, we ask that all comments be on-topic, respectful and spam-free. All comments made here are public and may be republished by Flying.

Login

New to Flying?

Register

Already have an account?