Close

Member Login

Logging In
Invalid username or password.
Incorrect Login. Please try again.

not a member? sign-up now!

Signing up could earn you gear and it helps to keep offensive content off of our site.

Staying Straight

By Pia Bergqvist / Published: Dec 13, 2011
Rate it! 100% or 0%
Flying Magazine | The World’s Most Widely Read Aviation Magazine

Photo: Tom Zwemke

Loss of control has consistently been the leading factor causing landing accidents, according to the annual Nall Report, published by AOPA’s Air Safety Institute. One way to prevent loss of directional control is to learn to consistently stay aligned with the centerline of the runway during the landing phase.

Some tricycle landing gear equipped airplanes are quite forgiving when it comes to imperfect landings, possibly making some pilots complacent. If you land a little bit sideloaded in a training airplane such as Cessna 172 or Piper Cherokee, you may stress the tires and gear slightly, but that will likely be the only repercussion. If you’re in a high-performance airplane, which lands at a faster speed and often has more delicate gear, you could get in trouble if your touchdown is not straight. Land sideloaded in a taliwheel airplane and you could be in for a wild ride called a ground loop.

There is a great tool to learn to maintain a straight path during the last phase of flight. It’s called the low approach. I would recommend going out with an instructor to practice low approaches, preferably at an airport with crossing runways to give you the opportunity to practice with the wind direction aligned with the runway and with crosswind conditions.

Work on approaching the runway as straight as possible making constant but small bank and yaw corrections. When you get closer to the runway, level off about 10 feet above the runway and attempt to keep the airplane’s path of travel perfectly aligned with the runway centerline. Use a visual reference point past the end of the runway, such as a tree, building or other prominent feature, to help you maintain a straight path while looking straight ahead.

The key to the perfectly straight touchdown path is a straight, stable approach and flare. This is achieved with constant but slight control inputs on the yoke and rudder. In certain airplanes, you may get away with an imperfect approach. But regardless of what type of airplane you fly, I believe you should strive to make every landing perfect.

Read more Flying Tips here.

Comments (4) Post a comment

All Comments

Gabriele's picture

why don't you try this: before arriving over the runway there's no need to have your aircraft aligned with runway centerline so all you have to do is keeping the ball centered and move your heading in order to keep your aircraft over the centerline (just over not aligned); when reaching the runway move pedals in order to align your aircraft to runway centerline keeping wings leveled with aileron control. at this time you may have two options: 1) put your aircraft on the ground as soon as possible before wind begins to push you sideways, 2) during flare bank against the wind enough to keep aircraft over the centerline while keeping aircraft aligned with pedals. you'll touch on one wheel of course but just remember not to move controls until second wheel touches down.
gabriele sedioli

MEII's picture

Please stop telling your students to look at the ball, that brings them into the airplane. Their eyes belong out side the plane, find another way to reference yaw. How about the leading edge of the wing ( with reference to the ground) in a low wing or the strut of a high wing. Try it, it works especially when doing stalls. Be safe!

aero_cfi's picture

In Cessnas, the yoke itself makes a great alignment tool for the runway. Your eyes can be outside, with the yoke's control shaft still in your peripheral vision. Get it lined up, and the plane's longitudinal axis is lined up.

towcub's picture

SZP :-)

Top Rated

Your Comment
CAPTCHA
This question is for testing whether you are a human visitor and to prevent automated spam submissions.
All submitted comments are subject to the license terms set forth in our Privacy Policy and Terms of Use