Signing up could earn you gear and it helps to keep offensive content off of our site.
Visit our Flying shop
I had a question regarding tach time on aircraft using a constant speed propellar. I know many clubs that charge tach time which is great. But what about the aircraft that have a constant speed propeller. Can't you theoretically get the same power output on a lower rpm. What if you lower the rpm and increase manifold or does that over stress the engine and you shouldn't do it. Do you have to increase the rpm when you increase the power, and lower rpm when you lower the power. Because after understanding little bit about how the constand speed prop works, I wondered that wouldn't somebody just lower the rpm to save on tach time. But I have heard at the same time that when you increase power, you increase the rpm as well, and when you lower the power you lower the rpm. Any thoughts!
Take advantage of all the helpful technology at your fingertips.
Copyright © 2013 FLYING. All rights reserved. Reproduction in whole or in part without permission is prohibited.